This 304 stainless steel black oxide button head screw combines a corrosion-resistant stainless steel material with a dark surface finish and a compact, rounded head. Its hexagon socket drive allows installation from above, making it a practical choice for equipment panels, enclosures, covers and other assemblies where appearance and head clearance matter.
With ASME B18.3 inch-series dimensions, this hexagon socket button head cap screw is intended for assemblies specified with inch threads. The black finish helps exposed fasteners blend with dark equipment surfaces, while the rounded head provides a neat appearance above the mounting surface.
Black Oxide Button Head Screw Product Specifications
| Product Type | Hexagon socket button head cap screw |
|---|---|
| Material | 304 austenitic stainless steel |
| Surface Finish | Black oxide |
| Dimensional Reference | ASME B18.3, inch series |
| Head Style | Rounded button head with a flat bearing surface |
| Drive Type | Internal hexagon socket |
| Thread Specification | Specify nominal inch diameter and threads per inch (TPI) |
| Length Specification | Measured from the underside of the head to the screw tip |
304 Stainless Steel Material
304 is a chromium-nickel austenitic stainless steel widely used for general industrial components. Its resistance to atmospheric corrosion makes it a practical material for many indoor installations and industrial environments with limited corrosive exposure.
For this screw, 304 provides the corrosion-resistant alloy base. This is useful for equipment covers, instrument housings and visible hardware where buyers require stainless steel together with a black appearance.
The suitability of the finished screw depends on its service environment and final surface condition. Chloride contamination, persistent moisture and aggressive cleaning chemicals should be considered when selecting the material and finish.
Black Oxide Finish and Its Effect on the Product
Black oxide is a thin conversion finish that creates a dark surface with minimal dimensional change. This makes it useful for threaded components where both appearance and dimensional control are important.
On this button head screw, the main visual benefit is a less conspicuous fastening point on black or dark-colored assemblies. The finish helps coordinate the screw head with surrounding panels, brackets and housings, particularly where the hardware remains visible after installation.
Final color, sheen and corrosion performance depend on surface preparation, the stainless steel blackening process and any supplementary sealant. Where appearance is critical, an approved sample can define the required black tone and surface condition. The finish should be selected together with the operating environment and any cleanliness or lubrication requirements.
Rounded Button Head with Hex Socket Drive
The button head provides a lower profile than a conventional cylindrical socket head, helping reduce projection above panels and covers. Its rounded outline is useful on exposed surfaces where a compact head shape is preferred.
The flat underside seats against the component surface without requiring a countersunk seat. The head remains above the mounting surface, making this design suitable for assemblies that need a rounded visible head rather than a flush countersunk installation.
The internal hexagon socket allows tightening with a hex key or matching driver bit. Installation requires access above the screw, while avoiding the side clearance needed for an external wrench.
Typical Applications
This combination of stainless steel, black appearance and button head geometry is useful for:
- Industrial equipment panels: Access covers, inspection panels and exterior housings with visible fastening points.
- Automation equipment: Sensor brackets, small covers and accessories where head clearance is limited.
- Electrical and electronic enclosures: Chassis, cabinet accessories and housing components requiring a coordinated black finish.
- Instrumentation: Instrument covers, mounting plates and control equipment assemblies.
- Lighting, audio and display equipment: Dark housings and exposed hardware locations where appearance consistency matters.
Selection should account for the required clamping load, component thickness, available head clearance and exposure conditions.
Specification and Installation
For correct matching, specify the nominal thread diameter, TPI and under-head length. Confirm the mating thread, required thread engagement, head diameter and hex socket size against the assembly drawing.
Tightening settings should suit the finished fastener and joint. Surface treatment, sealant and lubrication can affect the relationship between applied torque and clamping force. Use a correctly sized hex driver with full socket engagement, and establish the installation requirements for the actual assembly.
Quality and Order Support
Flybear supports standard and project-specific fastening requirements across its socket screw range. Inspection requirements can include material verification, dimensional checks, thread gauging, socket inspection and surface appearance evaluation.
For orders with defined acceptance criteria, specify the required inspection scope and documentation during quotation. Learn more about our fastener quality control and inspection support.
Request a Quotation
To request this 304 stainless steel black oxide button head screw, provide the inch thread size, TPI, length, quantity and applicable ASME B18.3 edition or drawing. Include any mechanical-property requirements, finish samples, supplementary treatment requirements and inspection documents needed for your project.
Send your specifications or drawing for product review and quotation.




